Tire size

How much a new width, aspect, and rim changes the overall diameter.

Diameters in

Current tire

Millimetres. Greater than 0, up to 500.

Percent of the section width. Greater than 0, up to 100.

Inches. Greater than 0, up to 30.

New tire

Millimetres. Greater than 0, up to 500.

Percent of the section width. Greater than 0, up to 100.

Inches. Greater than 0, up to 30.

Width is millimetres, aspect is a percent, and rim is inches. Millimetres and inches change only the diameter rows. A positive percent means the new tire is taller.

Enter both tire sizes.

How two tire sizes compare

A size such as 225/45R17 is a section width of 225 millimetres, an aspect ratio of 45 percent, and a rim of 17 inches. Sidewall height is the width times the aspect, divided by 100. Overall diameter in millimetres is the rim times 2540, plus twice the width times the aspect, divided by 100. The percent is 100 times the new diameter minus the current diameter, divided by the current diameter.

Section width is greater than 0 and at most 500. Aspect is greater than 0 and at most 100. Rim is greater than 0 and at most 30. A blank field, zero, or a negative number has no result. The same size is 0%. A positive percent means the new tire is taller, so the car is going faster than the speedometer shows. A negative percent means the new tire is shorter. Switching millimetres and inches does not change a size you already typed. Inches are the millimetre diameter divided by 25.4. The percent uses the millimetre diameters, so it stays the same.

How to use this tire comparison

  1. Choose millimetres or inches for the diameter rows.
  2. Enter the current width, aspect, and rim, then the new width, aspect, and rim. Width is greater than 0 and at most 500. Aspect is greater than 0 and at most 100. Rim is greater than 0 and at most 30.
  3. Read the percent. The rows below are the current diameter, the new diameter, and their difference.

Formula

Sidewall height is the section width times the aspect, divided by 100. Overall diameter in millimetres uses the rim in inches and that sidewall. The percent compares the new diameter with the current diameter.

Sidewall height
H=W⁢a100
Overall diameter in millimetres
D=2540⁢R+2⁢W⁢a100
Percent difference
P=100⁢(Dn−Dc)Dc

Inches are the millimetre diameter divided by 25.4. The percent is snapped from the millimetre diameters in one step. A taller new tire is a positive percent. The same size is 0%.

Where the formula comes from

The three numbers in a tire size are defined on the Wikipedia page that defines the tire code.

Worked examples

Example: 225/45R17 and the same size

Both diameters are 634.3 millimetres, or 24.9724409449 inches. The difference is 0%.

Example: 225/45R17 to 225/50R17

The current diameter is 634.3 millimetres, or 24.9724409449 inches. The new diameter is 656.8 millimetres, or 25.8582677165 inches. The difference is +22.5 millimetres, or +0.8858267716 inches. The page shows +3.54721740501%. An indicated 100 is actually 103.547217405.

Example: 205/55R16 to 225/45R17

631.9 millimetres becomes 634.3 millimetres. The difference is +2.4 millimetres. The page shows +0.379806931476%.

Example: 225/45R17 to 195/65R15

634.3 millimetres becomes 634.5 millimetres. The difference is +0.2 millimetres. The percent 0.0315308213779 is shown as +0.031530821378%.

Things to keep in mind

225/50R17 back to 225/45R17 is −22.5 millimetres and −3.42570036541%. An indicated 100 is actually 96.5742996346. In inches, 205/55R16 to 225/45R17 is 24.8779527559 to 24.9724409449, a difference of +0.094488189. In inches, 225/45R17 to 195/65R15 is 24.9724409449 to 24.9803149606, a difference of +0.0078740157. A 185/65R15 tire has diameter 621.5 millimetres, or 24.468503937 inches. A near integer is shown as that integer. Other results keep 12 significant digits, and a trailing zero is left off the screen. A percent with more than 12 digits after the decimal is rounded on the screen. This page does not use a load index or a speed rating.

Tire size FAQ

Which fields are required?

Width, aspect, and rim for the current tire and for the new tire. Width is greater than 0 and at most 500. Aspect is greater than 0 and at most 100. Rim is greater than 0 and at most 30. The starting display unit is millimetres.

What are the rows under the headline?

The current diameter, the new diameter, and their difference. The headline is the percent difference. The same size is 0%.

What do the three numbers in a size mean?

Section width is millimetres. Aspect is the sidewall as a percent of that width. Rim is inches. A size of 225/45R17 uses 225, 45, and 17.

Does switching millimetres and inches change the percent?

No. Inches are the millimetre diameter divided by 25.4. The percent uses the millimetre diameters. Switching the display unit does not change a size you already typed.

Why is there no result?

A blank field, zero, or a negative number has no result. The same is true for a width above 500, an aspect above 100, or a rim above 30.

Does this tire calculator store my figures?

A completed result can be saved in this browser’s local history, including both section widths, both aspect ratios, both rims, and the display unit you chose. It stays on your device and is not sent to our servers or to analytics. Clear it with the history Clear action or by clearing site data.