Required Minimum Distribution (RMD) Calculator

Estimate your annual RMD from account balance and the IRS Uniform Lifetime Table factor.

balance at the end of the prior year

your age on December 31 of this year

Enter your account balance and age.

How this RMD calculator works

A required minimum distribution (RMD) calculator estimates the annual U.S. withdrawal a retirement account must take: prior-year-end balance divided by the IRS Uniform Lifetime Table factor for your age at year-end. The headline is that estimated annual RMD. Details show the factor and the distribution rate (RMD ÷ balance).

Choose a currency (formatting only; the math is the U.S. RMD formula), then fill an account balance of 0 or more. Age uses the IRS Uniform Lifetime Table for whole ages 72 through 120 (73.9 uses the age-73 factor). Ages outside that range, or an empty age, give no result unless you open RMD details and type a custom factor greater than 0. If the year-end age is inside the table but below the SECURE Act start age, the required distribution is 0 and the factor is not applied. With birth year empty, that start age uses the current calendar year minus the year-end age. In 2026, age 72 implies birth year 1954 and a start age of 73. A typed 0 balance with a valid factor is USD 0.00. For IRA growth before RMDs start, use the Traditional IRA calculator.

How to use the RMD calculator

  1. Choose a currency and enter the retirement account balance at the end of the prior year.
  2. Enter your age at the end of this year so the Uniform Lifetime Table can supply a factor (ages 72–120).
  3. Read the estimated annual RMD, the factor, and the distribution rate. If the year-end age is below the SECURE Act start age, the RMD is 0 and no factor is applied. A typed 0 balance is valid once a factor exists or the year is before that start age.
  4. Open RMD details only for a birth-year first-RMD estimate or a custom factor. Closing that section drops the custom factor and the typed birth year, and hides the first-RMD rows even if values stay typed.

Uniform Lifetime Table factor

This calculator stores the IRS Uniform Lifetime Table (Publication 590-B, Table III) for ages 72 through 120. Age 72 is 27.4. Ages 115 through 120 are 2.9, 2.8, 2.7, 2.5, 2.3, and 2.0. Age is floored to a whole year before lookup. There is no factor for 71 or below, or above 120, unless a custom factor greater than 0 is in use. A year-end age that has a factor but is still below the SECURE Act start age is not a distribution year: the required amount is 0 and the factor is not applied. Distribution rate is the RMD divided by balance (0% when balance is 0 or when no distribution is required).

RMD details, and closing it

Custom distribution factor and birth year are used only while RMD details is open. A custom factor greater than 0 replaces the table value — and can produce an RMD even if age is empty, outside 72–120, or still below the SECURE Act start age. Birth year (1900–2100) sets the first-RMD age and year from the SECURE Act: born 1960 or later starts at 75; 1951–1959 at 73; 1950 or earlier at 72. First-RMD year is birth year plus that start age. A year-end age below that start age is not a distribution year, so the required amount is 0 unless a custom factor greater than 0 is typed. An empty birth year uses the current calendar year minus the year-end age. Closing RMD details ignores the custom factor and the typed birth year, and hides first-RMD rows even if those fields stay filled.

RMD formula

When a distribution is required, annual RMD is prior-year-end balance divided by the distribution factor. The factor is the custom value when RMD details is open and that value is greater than 0; otherwise it is the Uniform Lifetime Table entry for floor(age). If that age is below the applicable SECURE Act start age and no custom factor is in use, the required distribution is 0 and the factor is not applied.

Estimated annual RMD
RMD=balancefactor

Worked examples

Example: USD 500,000 at age 73

With RMD details closed, age 73 uses factor 26.5. Estimated RMD is 500,000 ÷ 26.5 = USD 18,867.92. Distribution rate is about 3.77%.

Example: USD 500,000 at age 72

With RMD details closed in 2026, age 72 implies birth year 1954. The SECURE Act start age for 1951–1959 is 73, so this is not a distribution year and the estimated RMD is USD 0.00. The table factor 27.4 is not applied (500,000 ÷ 27.4 would be USD 18,248.18). Open RMD details and enter birth year 1950 so the start age is 72: the same age and balance then use factor 27.4 and the RMD is USD 18,248.18. Close RMD details and age 72 returns to USD 0.00. A custom factor greater than 0 still calculates a withdrawal at 72.

Example: the same balance with a custom factor of 25

Open RMD details and type 25 as the custom factor. That value replaces 26.5, so the RMD is 500,000 ÷ 25 = USD 20,000.00. Close RMD details and the result returns to USD 18,867.92 even if 25 stays typed.

Example: birth year 1955

Open RMD details and enter 1955. First RMD age is 73 (born 1951–1959) and first RMD year is 1955 + 73 = 2028. Born in 1960 would start at 75; born in 1950 would start at 72. Close the section and those rows disappear even if 1955 stays typed.

Things to keep in mind

This is an estimate, not tax advice. Inherited-IRA and joint-life tables are not applied unless you type a custom factor. Empty age with no custom factor is no result. A year-end age inside the table but below the SECURE Act start age is a completed result of 0, not a missing result. Amounts are shown as an ISO currency code, then the number (USD 18,867.92). Switching currency only changes formatting.

RMD calculator FAQ

Why is there no result at age 71?

The built-in table covers ages 72 through 120. Age 71, an empty age, or an age above 120 has no table factor. Open RMD details and type a custom factor greater than 0 if you need a different table.

Can the account balance be 0?

Yes. A typed 0 balance with a valid factor yields USD 0.00. Leaving balance empty is no result.

Does a custom factor replace my age?

While RMD details is open, a custom factor greater than 0 is the factor, even if age is empty or outside 72–120. A typed 0 custom factor does not override the table.

What happens if I close RMD details?

The custom factor and the typed birth year are ignored, and first-RMD age/year rows hide, even if those fields stay filled. The RMD then needs a table factor from age 72–120, and the year-end age must be at least the start age implied by the current calendar year. In 2026 that means age 72 is USD 0.00.

How is first RMD age chosen from birth year?

While RMD details is open and birth year is 1900–2100, the typed year is used. Born 1960 or later: 75. Born 1951–1959: 73. Born 1950 or earlier: 72. The year is birth year plus that age. The same ages decide whether a withdrawal is required. With birth year empty, or with RMD details closed, the calculator uses the current calendar year minus the year-end age. If the year-end age is still below that start age, and no custom factor greater than 0 is in use, the RMD is 0. In 2026, age 72 with no birth year is birth year 1954 and start age 73, so the required amount is USD 0.00 and the age-72 factor 27.4 is not applied.

Does this RMD calculator store my numbers?

Completed results can be saved in this browser’s local history so you can reopen them later. They stay on your device and are not sent to our servers or to analytics.