Brick and block

Whole bricks or blocks for one rectangular wall, from a typical count per square foot or square metre.

Material
Measured in

Feet. Greater than 0, up to 1,000.

Feet. Greater than 0, up to 1,000.

Length and height are one wall. The headline rounds up to a whole brick or block.

Enter the length and the height.

How a wall becomes a count

Multiply length by height to get the wall area, then multiply by a typical count for the material. The page rounds that product up to a whole brick or block. Feet use 7 bricks or 1.125 blocks per square foot. Metres use 60 bricks or 10 blocks per square metre.

Each side is greater than 0 and at most 1,000. A blank field, zero, or a negative number has no result. These rates already include a usual mortar joint. An 8 by 16 inch block face is 1.125 blocks per square foot. The feet rates are not a conversion of the metre rates, and switching the unit does not convert a number you already typed.

How to use this brick and block calculator

  1. Choose brick or block, then feet or metres.
  2. Enter the length and the height. Each is greater than 0 and at most 1,000.
  3. Read the headline. It is the number of whole bricks or blocks. The rows below are the wall area and the count before rounding up.

Formula

The count starts as length times height times the rate for the material.

Count before rounding
N=L⁢H⁢r

Brick uses 7 per square foot or 60 per square metre. Block uses 1.125 per square foot or 10 per square metre. The page then rounds up to a whole unit. The two unit systems use their own round figures. They are not a conversion of each other.

Where the formula comes from

Area of a rectangle is the relation on the Wikipedia page that defines area.

Worked examples

Example: brick, 8 by 8 feet

The wall is 8 × 8 = 64 square feet. At 7 per square foot, that is 448 bricks. The count is already a whole number, so the page orders 448.

Example: block, the same wall

64 × 1.125 = 72. The page orders 72 blocks. The wall is still 64 square feet.

Example: block, 10 by 1 foot

The wall is 10 square feet. At 1.125 per square foot, the count is 11.25 before rounding up, so the page orders 12 blocks.

Example: brick, 4 by 3 metres

The wall is 4 × 3 = 12 square metres. At 60 per square metre, that is 720 bricks.

Things to keep in mind

The same 4 by 3 metre wall in block is 12 × 10 = 120 blocks. A 10 by 3 foot brick wall is 30 × 7 = 210 bricks. A 10 by 0.333333333333 foot brick wall is 3.33333333333 square feet, which is 23.3333333333 before rounding up, so the page orders 24 bricks. A near integer is shown as that integer. Other results keep 12 significant digits, and a trailing zero is left off the screen. This page does not subtract doors or windows, count mortar as its own volume, or price the wall.

Brick and block calculator FAQ

Which fields are required?

Length and height. Each is greater than 0 and at most 1,000. The starting material is brick, and the starting unit is feet.

What are the rows under the headline?

The wall area and the count before rounding up. In feet the area is square feet. In metres it is square metres. The headline is the whole bricks or blocks after rounding up.

Where do 7, 1.125, 60, and 10 come from?

They are typical ordering counts, with a usual mortar joint already included. Block at 1.125 per square foot is an 8 by 16 inch face. Brick at 7 per square foot, brick at 60 per square metre, and block at 10 per square metre are the matching typical modules. The feet figures are not a conversion of the metre figures.

Does the page subtract a door or a window?

No. The count is the full rectangle. A door or a window stays in the area.

Why is there no result?

A blank field, zero, or a negative number has no result. The same is true above 1,000.

Does this brick and block calculator store my dimensions?

A completed result can be saved in this browser’s local history, including the material, the length and height, and the unit you chose. It stays on your device and is not sent to our servers or to analytics. Clear it with the history Clear action or by clearing site data.