Board feet

Board feet for one board size, or cubic metres when you measure in metres.

Measured in

Inches. Greater than 0, up to 1,000.

Inches. Greater than 0, up to 1,000.

Feet. Greater than 0, up to 1,000.

Greater than 0, up to 1,000.

The page uses the thickness and width you type. The row below is one piece.

Enter the thickness, the width, the length, and the number of pieces.

How a board becomes board feet

In feet, multiply thickness in inches by width in inches by length in feet by the number of pieces, then divide by 12. That is the board-foot total. One piece is the same product with a single board. In metres, multiply thickness, width, and length in metres by the number of pieces. That total is cubic metres.

Each input is greater than 0 and at most 1,000. A blank field, zero, or a negative number has no result. Switching the unit does not convert a number you already typed. A cubic-metre result is not a conversion of a board-foot result. The page does not shrink a nominal size. A nominal 2 by 4 is often 1.5 by 3.5 inches after dressing, and that smaller size is a result only when you type it.

How to use this board foot calculator

  1. Choose feet or metres.
  2. Enter the thickness, the width, the length, and the number of pieces. Each is greater than 0 and at most 1,000. In feet, thickness and width are inches and length is feet.
  3. Read the headline. It is the total board feet, or the total cubic metres. The row below is one piece.

Formula

In feet, board feet are thickness times width times length times pieces, divided by 12.

Board feet
V=T⁢W⁢L⁢N12

Thickness and width are inches, and length is feet. In metres, the volume is thickness times width times length times pieces, in cubic metres, with no division by 12. The two results are not a conversion of each other.

Where the formula comes from

A board foot is one square foot, one inch thick, as on the Wikipedia page that defines the board foot.

Worked examples

Example: 2 by 4 inches, 8 feet, 1 piece

2 × 4 × 8 ÷ 12 = 5.33333333333 board feet. One piece is the same number.

Example: the same board, 10 pieces

2 × 4 × 8 × 10 ÷ 12 = 53.3333333333 board feet. One piece stays 5.33333333333.

Example: 2 by 6 inches, 10 feet, 3 pieces

2 × 6 × 10 × 3 ÷ 12 = 30 board feet. One piece is 2 × 6 × 10 ÷ 12 = 10 board feet.

Example: 0.05 by 0.1 by 2 metres, 1 piece

0.05 × 0.1 × 2 = 0.01 cubic metres. One piece is the same number. There is no division by 12.

Things to keep in mind

A 1 by 12 inch board, 1 foot long, 1 piece, is 1 board foot. A 2 by 10 inch board, 8 feet long, 1 piece, is 13.3333333333 board feet. A 1 by 8 inch board, 10 feet long, 1 piece, is 6.66666666667 board feet. The same 0.05 by 0.1 by 2 metre piece, 4 times, is 0.04 cubic metres, and one piece stays 0.01. A dressed 2 by 4 is often 1.5 by 3.5 inches. Typed as 1.5 by 3.5 by 8 feet and 1 piece, that is 3.5 board feet. A near integer is shown as that integer. Other results keep 12 significant digits, and a trailing zero is left off the screen. This page does not add waste or a price.

Board foot calculator FAQ

Which fields are required?

Thickness, width, length, and the number of pieces. Each is greater than 0 and at most 1,000. The starting unit is feet.

What is the row under the headline?

The volume of one piece. The headline is the total for every piece. In feet both numbers are board feet. In metres both numbers are cubic metres.

Why divide by 12?

A board foot is 12 inches wide, 12 inches long, and 1 inch thick. Thickness and width are in inches and length is in feet, so the product is divided by 12. Metres do not use that division.

Does a nominal 2 by 4 become 1.5 by 3.5?

No. The page uses the thickness and width you type. A dressed 1.5 by 3.5 inch board, 8 feet long, 1 piece, is 3.5 board feet.

Why is there no result?

A blank field, zero, or a negative number has no result. The same is true above 1,000.

Does this board foot calculator store my dimensions?

A completed result can be saved in this browser’s local history, including the thickness, the width, the length, the number of pieces, and the unit you chose. It stays on your device and is not sent to our servers or to analytics. Clear it with the history Clear action or by clearing site data.