How a footprint becomes bundles
Multiply the footprint length by the width, then by the slope factor. The factor is the hypotenuse of the pitch rise and a run of 12, divided by 12. The page turns that roof area into bundles and rounds up to a whole bundle. Feet use 3 bundles per 100 square feet. Metres use 3 bundles per 10 square metres.
Each side is greater than 0 and at most 1,000. The pitch rise is from 0 up to 24, for every 12 of horizontal run. A rise of 0 is a flat roof, and the factor is 1. A blank field has no result. A side of zero, a negative number, a side above 1,000, or a rise above 24 has no result. A 9 in 12 pitch is a 3-4-5 triangle, so the factor is 1.25. A 5 in 12 pitch is a 5-12-13 triangle, so the factor is 13 divided by 12. Switching the unit does not convert a number you already typed. The feet bundle rate is not a conversion of the metre rate.
How to use this roof pitch calculator
- Choose feet or metres.
- Enter the length and the width of the flat footprint, and the pitch rise per 12 of run. Each side is greater than 0 and at most 1,000. The rise is from 0 up to 24.
- Read the headline. It is the number of whole bundles. The rows below are the slope factor, the sloped roof area, and the bundle count before rounding up.
Formula
The slope factor is the hypotenuse of the rise and a run of 12, divided by 12.
The roof area is the footprint times this factor. Feet then use 3 bundles per 100 square feet. Metres use 3 bundles per 10 square metres. The page rounds that bundle count up. The two rates are typical ordering figures. They are not a conversion of each other.
Where the formula comes from
The slope factor is the hypotenuse of the rise and a run of 12, as on the Wikipedia page that defines the Pythagorean theorem.
Worked examples
Example: 40 by 20 feet, rise 9
The footprint is 40 × 20 = 800 square feet. A rise of 9 is a 9-12-15 triangle, so the slope factor is 15 ÷ 12 = 1.25. The roof is 800 × 1.25 = 1,000 square feet. At 3 bundles per 100 square feet, that is 30 bundles.
Example: 10 by 35 feet, flat
A rise of 0 keeps the factor at 1. The roof is 350 square feet. At 3 per 100, the count is 10.5 before rounding up, so the page orders 11 bundles.
Example: 30 by 40 feet, rise 5
The footprint is 1,200 square feet. A rise of 5 is a 5-12-13 triangle, so the factor is 1.08333333333. The product is a tiny step from 1,300 square feet, so the page shows 1,300. At 3 per 100, that is 39 bundles.
Example: 10 by 4 metres, rise 9
The footprint is 40 square metres. The factor is again 1.25, so the roof is 50 square metres. At 3 bundles per 10 square metres, that is 15 bundles.
Things to keep in mind
A 20 by 16 foot roof at a rise of 6 has a slope factor of 1.11803398875. The roof is 357.7708764 square feet, which is 10.733126292 bundles before rounding up, so the page orders 11. A 10 by 10 foot roof at a rise of 12 has a slope factor of 1.41421356237. The roof is 141.421356237 square feet, which is 4.24264068711 bundles before rounding up, so the page orders 5. A 5 by 3 metre flat roof is 15 square metres, which is 4.5 bundles before rounding up, so the page orders 5. A near integer is shown as that integer. Other results keep 12 significant digits, and a trailing zero is left off the screen. This page does not add hips, valleys, dormers, waste, ridge caps, or a price.
Roof pitch calculator FAQ
Which fields are required?
Length, width, and pitch rise. Each side is greater than 0 and at most 1,000. The rise is from 0 up to 24. The starting unit is feet.
What are the rows under the headline?
The slope factor, the sloped roof area, and the bundle count before rounding up. In feet the area is square feet. In metres it is square metres. The headline is the whole bundles after rounding up.
Where do the factor and the bundle rates come from?
The factor is the hypotenuse of the rise and a run of 12, divided by 12. A rise of 9 gives 1.25. A rise of 5 gives 1.08333333333. Feet then use 3 bundles per 100 square feet, and metres use 3 bundles per 10 square metres. Those rates are typical ordering figures. The feet rate is not a conversion of the metre rate.
Does the page add waste or a ridge cap?
No. The count is field bundles for one rectangle. Hips, valleys, dormers, waste, and ridge caps stay out of the result.
Why is there no result?
A blank field has no result. A side of zero, a negative number, a side above 1,000, or a rise above 24 has no result. A rise of 0 is a flat roof and still has a result.
Does this roof pitch calculator store my dimensions?
A completed result can be saved in this browser’s local history, including the length and width, the pitch rise, and the unit you chose. It stays on your device and is not sent to our servers or to analytics. Clear it with the history Clear action or by clearing site data.