Paint coverage

Gallons or litres for one rectangular surface, from the coverage on the can and the number of coats.

Measured in

Feet. Greater than 0, up to 1,000.

Feet. Greater than 0, up to 1,000.

Square feet per gallon. Greater than 0, up to 1,000.

Greater than 0, up to 100.

Length and width are one surface. Coverage is how far one gallon or one litre goes. The headline multiplies by the coats.

Enter the surface, the coverage, and the coats.

How a surface becomes a volume of paint

Multiply length by width to get the area. Divide that area by the coverage on the can, then multiply by the number of coats. Feet use gallons and square feet per gallon. Metres use litres and square metres per litre.

Each side and the coverage are greater than 0 and at most 1,000. Coats are greater than 0 and at most 100. A blank field, zero, or a negative number has no result. A wall uses its length and its height as the two sides. A typical can often lists about 350 to 400 square feet per gallon, or about 10 to 12 square metres per litre. This page uses the coverage you type. Switching the unit does not convert a number you already typed.

How to use this paint coverage calculator

  1. Choose feet or metres. The surface and the coverage both use that unit.
  2. Enter the length and width, the coverage, and the coats. Sides and coverage are greater than 0 and at most 1,000. Coats are greater than 0 and at most 100.
  3. Read the headline. In feet it is gallons. In metres it is litres. The rows below are the surface area and the volume of one coat.

Formula

Paint volume is length times width times coats, divided by the coverage.

Paint volume
V=L⁢W⁢nc

One coat is the area divided by the coverage, before the coats are applied. The headline multiplies by the coats in one step, so a repeating one-coat figure is not always an exact half of a two-coat headline. The page does not round up to a full can. One square metre is not converted into square feet.

Where the formula comes from

Area of a rectangle is the relation on the Wikipedia page that defines area.

Worked examples

Example: 12 by 8 feet, 400 square feet per gallon, 1 coat

The surface is 12 × 8 = 96 square feet. Divided by 400, that is 0.24 gallons. One coat is the same 0.24 gallons.

Example: the same surface with 2 coats

96 × 2 ÷ 400 = 0.48 gallons. The surface is still 96 square feet, and one coat is still 0.24 gallons.

Example: 10 by 10 feet, 350 square feet per gallon, 2 coats

The surface is 100 square feet. One coat is 100 ÷ 350 = 0.285714285714 gallons. Two coats are 200 ÷ 350 = 0.571428571429 gallons.

Example: 4 by 3 metres, 10 square metres per litre, 2 coats

The surface is 4 × 3 = 12 square metres. One coat is 12 ÷ 10 = 1.2 litres. Two coats are 24 ÷ 10 = 2.4 litres.

Things to keep in mind

An 8 by 3 foot surface at 350 square feet per gallon and 1 coat is 24 square feet, which is 0.0685714285714 gallons. A 5 by 4 metre surface at 12 square metres per litre and 1 coat is 20 square metres, which is 1.66666666667 litres. A near integer is shown as that integer. Other results keep 12 significant digits, and a trailing zero is left off the screen. This page does not subtract doors or windows, round up to a full can, or price the paint.

Paint coverage calculator FAQ

Which fields are required?

Length, width, coverage, and coats. Each side and the coverage are greater than 0 and at most 1,000. Coats are greater than 0 and at most 100. The starting unit is feet.

What are the rows under the headline?

The surface area and the volume of one coat. In feet the headline is gallons and the area is square feet. In metres the headline is litres and the area is square metres. One coat is the area divided by the coverage.

What number do I type for coverage?

The figure on the can. In feet it is square feet per gallon. In metres it is square metres per litre. A common range is about 350 to 400 square feet per gallon, or about 10 to 12 square metres per litre. The page uses the number you type.

Does this round up to a whole can?

No. The headline is the volume. A 12 by 8 foot surface at 400 square feet per gallon and 1 coat is 0.24 gallons, not 1 gallon.

Why is there no result?

A blank field, zero, or a negative number has no result. The same is true for a side or a coverage above 1,000, and for coats above 100.

Does this paint coverage calculator store my dimensions?

A completed result can be saved in this browser’s local history, including the length and width, the coverage, the number of coats, and the unit you chose. It stays on your device and is not sent to our servers or to analytics. Clear it with the history Clear action or by clearing site data.