Drywall sheets

Whole sheets for one rectangular wall or ceiling, from the sheet size you type.

Measured in

Feet. Greater than 0, up to 1,000.

Feet. Greater than 0, up to 1,000.

Feet. Greater than 0, up to 1,000.

Feet. Greater than 0, up to 1,000.

Length and width are one wall or ceiling. The headline rounds up to a whole sheet.

Enter the wall length and width, and the sheet length and width.

How a wall becomes sheets

Multiply the wall length by the width, and the sheet length by the sheet width. Divide the wall area by the sheet area. The page rounds that quotient up to a whole sheet.

Each side is greater than 0 and at most 1,000. A blank field, zero, or a negative number has no result. A wall’s height is the second side. A 4 by 8 foot sheet is 32 square feet only when you type 4 and 8. A 1.2 by 2.4 metre sheet is 2.88 square metres only when you type those numbers. Switching the unit does not convert a number you already typed. The feet result is not a conversion of the metre result.

How to use this drywall calculator

  1. Choose feet or metres.
  2. Enter the wall length and width, then the sheet length and width. Each is greater than 0 and at most 1,000.
  3. Read the headline. It is the number of whole sheets. The rows below are the wall area, the area of one sheet, and the count before rounding up.

Formula

The count starts as the wall area divided by the sheet area.

Sheets before rounding
N=L⁢Wa⁢b

The page then rounds up to a whole sheet. The sheet size is the length and width you type. A run that divides evenly does not add an extra sheet.

Where the formula comes from

Area of a rectangle is the relation on the Wikipedia page that defines area.

Worked examples

Example: 8 by 12 feet, sheet 4 by 8

The wall is 8 × 12 = 96 square feet. The sheet is 4 × 8 = 32 square feet. 96 ÷ 32 = 3, already a whole number, so the page orders 3 sheets.

Example: 8 by 10 feet, the same sheet

The wall is 80 square feet. 80 ÷ 32 = 2.5 before rounding up, so the page orders 3 sheets. The sheet is still 32 square feet.

Example: 9 by 8 feet, sheet 4 by 8

The wall is 72 square feet. 72 ÷ 32 = 2.25 before rounding up, so the page orders 3 sheets.

Example: 2.4 by 3 metres, sheet 1.2 by 2.4

The wall is 2.4 × 3 = 7.2 square metres. The sheet is 1.2 × 2.4 = 2.88 square metres. 7.2 ÷ 2.88 = 2.5 before rounding up, so the page orders 3 sheets.

Things to keep in mind

A 10 by 8 foot wall with a 4 by 12 foot sheet is 80 square feet against 48 square feet, which is 1.66666666667 before rounding up, so the page orders 2 sheets. An 8 by 8 foot wall with a 4 by 8 foot sheet is 64 square feet and 2 sheets. A 5 by 4 foot wall with a 4 by 8 foot sheet is 20 square feet, which is 0.625 before rounding up, so the page orders 1 sheet. A 3 by 3 metre wall with a 1.2 by 2.4 metre sheet is 9 square metres against 2.88 square metres, which is 3.125 before rounding up, so the page orders 4 sheets. A near integer is shown as that integer. Other results keep 12 significant digits, and a trailing zero is left off the screen. This page does not subtract a door or a window, add waste, or price the sheets.

Drywall calculator FAQ

Which fields are required?

Wall length, wall width, sheet length, and sheet width. Each is greater than 0 and at most 1,000. The starting unit is feet.

What are the rows under the headline?

The wall area, the area of one sheet, and the count before rounding up. In feet the areas are square feet. In metres they are square metres. The headline is the whole sheets after rounding up.

Does the page assume a 4 by 8 sheet?

No. The sheet is the length and width you type. Typed as 4 by 8 feet, one sheet is 32 square feet. Typed as 1.2 by 2.4 metres, one sheet is 2.88 square metres.

Does the page subtract a door or add waste?

No. The count is the full rectangle, rounded up to a whole sheet. A door, a window, and extra sheets for cuts stay out of the result.

Why is there no result?

A blank field, zero, or a negative number has no result. The same is true above 1,000.

Does this drywall calculator store my dimensions?

A completed result can be saved in this browser’s local history, including the wall length and width, the sheet length and width, and the unit you chose. It stays on your device and is not sent to our servers or to analytics. Clear it with the history Clear action or by clearing site data.