Patio pavers

Whole pavers for one rectangular patio, from the paver size you type.

Patio measured in

Feet. Greater than 0, up to 1,000.

Feet. Greater than 0, up to 1,000.

Inches. Greater than 0, up to 1,000.

Inches. Greater than 0, up to 1,000.

Length and width are one patio. Paver sides are inches in feet, and centimetres in metres. The headline rounds up to a whole paver.

Enter the patio length and width, and the paver length and width.

How a patio becomes pavers

Multiply the patio length by the width. In feet, multiply the paver sides in inches and divide by 144. In metres, multiply the paver sides in centimetres and divide by 10,000. Divide the patio area by the area of one paver. The page rounds that quotient up to a whole paver.

Each side is greater than 0 and at most 1,000. A blank field, zero, or a negative number has no result. A 4 by 8 inch paver is 0.222222222222 square feet only when you type 4 and 8. A 20 by 10 centimetre paver is 0.02 square metres only when you type those numbers. Switching the unit does not convert a number you already typed. The feet result is not a conversion of the metre result.

How to use this paver calculator

  1. Choose feet or metres for the patio.
  2. Enter the patio length and width, then the paver length and width. In feet the paver sides are inches. In metres they are centimetres. Each is greater than 0 and at most 1,000.
  3. Read the headline. It is the number of whole pavers. The rows below are the patio area, the area of one paver, and the count before rounding up.

Formula

The count starts as the patio area divided by the area of one paver. In feet the paver area uses 144, because each side is in inches.

Pavers before rounding, in feet
N=144⁢L⁢Wa⁢b
Pavers before rounding, in metres
N=10000⁢L⁢Wa⁢b

The page then rounds up to a whole paver. In metres the same count uses 10,000, because the paver sides are centimetres. The paver size is the length and width you type. A patio that divides evenly does not add an extra paver.

Where the formula comes from

Area of a rectangle is the relation on the Wikipedia page that defines area.

Worked examples

Example: 10 by 12 feet, paver 4 by 8 inches

The patio is 10 × 12 = 120 square feet. The paver is 4 × 8 ÷ 144 = 0.222222222222 square feet. 120 ÷ 0.222222222222 = 540, already a whole number, so the page orders 540 pavers.

Example: 10 by 12 feet, paver 5 by 5 inches

The patio is still 120 square feet. The paver is 5 × 5 ÷ 144 = 0.173611111111 square feet. 120 ÷ 0.173611111111 = 691.2 before rounding up, so the page orders 692 pavers.

Example: 10 by 10 feet, paver 6 by 6 inches

The patio is 100 square feet. The paver is 6 × 6 ÷ 144 = 0.25 square feet. 100 ÷ 0.25 = 400, so the page orders 400 pavers.

Example: 3 by 4 metres, paver 20 by 10 centimetres

The patio is 3 × 4 = 12 square metres. The paver is 20 × 10 ÷ 10,000 = 0.02 square metres. 12 ÷ 0.02 = 600, so the page orders 600 pavers.

Things to keep in mind

An 8 by 10 foot patio with a 12 by 12 inch paver is 80 square feet against 1 square foot, so the page orders 80 pavers. A 4 by 8 foot patio with a 4 by 8 inch paver is 32 square feet against 0.222222222222 square feet, so the page orders 144 pavers. A 3 by 2 metre patio with a 30 by 30 centimetre paver is 6 square metres against 0.09 square metres, which is 66.6666666667 before rounding up, so the page orders 67 pavers. A near integer is shown as that integer. Other results keep 12 significant digits, and a trailing zero is left off the screen. This page does not leave a gap between pavers, follow a curve, add waste, or price the pavers.

Paver calculator FAQ

Which fields are required?

Patio length, patio width, paver length, and paver width. Each is greater than 0 and at most 1,000. The starting unit is feet, and the paver sides are then inches.

What are the rows under the headline?

The patio area, the area of one paver, and the count before rounding up. In feet the areas are square feet and the paver sides are inches. In metres the areas are square metres and the paver sides are centimetres. The headline is the whole pavers after rounding up.

Does the page assume a 4 by 8 inch paver?

No. The paver is the length and width you type. Typed as 4 by 8 inches, one paver is 0.222222222222 square feet. Typed as 20 by 10 centimetres, one paver is 0.02 square metres.

Does the page leave a gap or add waste?

No. The count is the full rectangle divided by the face of one paver, rounded up to a whole paver. A joint gap, a curve, and extra pavers for cuts stay out of the result.

Why is there no result?

A blank field, zero, or a negative number has no result. The same is true above 1,000.

Does this paver calculator store my dimensions?

A completed result can be saved in this browser’s local history, including the patio length and width, the paver length and width, and the unit you chose. It stays on your device and is not sent to our servers or to analytics. Clear it with the history Clear action or by clearing site data.